CHECKING CONNECTIVITY BETWEEN COMPUTERS (PING)

CHECKING CONNECTIVITY

Connectivity is checked by using PING command

See the Example

Two systems System 1 and System 2

System 1 IP address is 192.168.10.10

System 2 IP address is 192.168.10.11

Check connection from system 1 to system 2

Open command prompt (Start-run type cmd Enter)

Eg: Ping 192.168.10.11

Check the data received and send is not zero

Check connection from system 2 to system 1

Open command prompt (Start-run type cmd Enter)

Eg: Ping 192.168.10.10

Check the data received and send is not zero

Comments

[Arun]

I found the problem......i was using regular patch cable instead of crossover cable...:(

[Arun]

Btween Laptop and Desktop

[Arun]

Btween Laptop and Desktop

[NANDA GOPAN]

ok fine

 (1)     first of all u have to check u r LAN cable is properly crimped,that is cross crimped.
the sequence of cross crimped connection is.(check the color of the wire in this sequence)

on one end of the cable with RJ45 socket the sequence is-Orange white,Orange,Greenwhite,Blue white,Blue,Green,BrownWhite,Brown.
On the other end with RJ45 socket is-Greenwhite,Green,OrangeWhite,BlueWhite,Blue,Orange,BrownWhite,Brown. 

 (2) Check the LAN Driver is properly installed.
   go to control pannel click systems-Hardware-device manager. in this expand network adapters and check u r Lan card is shown.If not install u r Lan card driver.Check this in both Lap
and Desktop.

(3) Check the IP Address is correctly given.Use the Same class of Ip in both the Systems
Leave the gateway and DNS side blank.

 (4) Check the WorkGroup name is SAME on both the Systems.If u change the name again it seeks restart.u must restart before going to next step.

(5) connect the cable to the LAN cards and check the LIGHT in the LAN CARDs are blinking.

(6) Disable u r FIREWALL on both the Machines.IF u r Antivirus software has Firewall Disable it.OR Shutdown the antivirus software and try.

also try disable u r wi - fi connection in the LAP

i hope these steps may solve u r problem. If the problem still exist write to me shortly what r the thing u do.Feel free to ask me u r problems.

 

[Arun]

It shows that the data recived is zero...... why is that ......i did everything correctly as u said..... plz help

[NANDA GOPAN]

will you pls mention me which type of connection are you tried to make. between a laptop and a desktop or between two laptops or like that . i can surely help you...